Solid Surface Worktops Cut to Size

Prices below are for first cut and charged at the discounted rate for multiple cuts.

First cut

Additional Cuts

If you need your solid surface worktop cut-to-size, we can cut your surface in a straight line across the length or width to meet your requirements. Our machinery will ensure a precise cut as it is serviced regularly to maintain the high standards of this service.

Edge Polishing (Per Metre)

We offer an edge polishing service for our solid laminate worktops to remove any marks that may have been left through other bespoke worktop services. 2mm is skimmed from the edge and it is then polished to provide a neat finish and ensure your worktop is ready for installation.

Edge polishing is recommended where worktop edges will be visible once installed. Not all edges are polished as standard, and whilst all edges will be smooth, some may show marks from the manufacturing process.

A biscuit joint is the best method for joining two solid surface worktop.

This style of biscuit joint has pockets machined into the edge of the worktops to be connected, which will need to be filled with standard size 20 biscuits.

This technique provides a secure join and wastes less material compared to a traditional 90° biscuit joint. A clear 2-part epoxy resin can be used to fix the biscuits in place, securely fasten the surface together and also work as a waterproof sealant.

Please note: 10mm will be lost from the ‘female’ side of the work surface on biscuit joints and will need to be added to the connecting ‘male’ end to ensure your worktop is the correct length.

Once provided with the correct measurements, we are able to accurately cut an aperture for an overmounted sink.

It is recommended that overmounted sinks are placed 150mm from joins in work surfaces and 50mm from the front edge of a worktop to ensure stability.

Please ensure you’re providing the cut out dimensions for your sink rather than the internal/external dimensions to ensure your sink fits as expected.

Please note: to prevent splitting, corners will need a minimum radius of 8mm.

To protect the integrity of the product in transit we are only able to offer a partial cut in this product. Large cut-outs for Butler and Belfast sinks are not available.

To see how the cut-out can be removed once delivered, please see our Solid Surface Installation and Care Guide.

Priced per cut-out.

Undermounted sinks are available in a variety of shapes and sizes.

Once provided with the correct measurements, we are able to cut an accurate space to accommodate a sink of any dimensions.

Please ensure you’re providing the cut out dimensions for your sink rather than the internal/external dimensions to ensure your sink fits as expected.

Please note: to prevent splitting, corners will need a minimum radius of 8mm.

To protect the integrity of the product in transit we are only able to offer a partial cut in this product. Large cut-outs for Butler and Belfast sinks are not available.

To see how the cut-out can be removed once delivered, please see our Solid Surface Installation and Care Guide.

A radius corner is an excellent option for a solid surface worktop that will sit atop curved kitchen cabinets. We are able to cut corners to any radius provided, ensuring we can accommodate any requirements.

Radius corners are a fantastic way to achieve a softer finish and are a practical choice for those with young children.

Priced per cut-out.

Cuts under 400mm

Cuts over 400mm

Every kitchen is different, which is why we offer an irregular cut-out option.

Our irregular cut-outs are suitable to accommodate a variety of kitchen items, including extractor fans, electrical sockets and architectural features such as extruding beams.

Please note: to prevent splitting, corners will need a minimum radius of 8mm.

To protect the integrity of the product in transit we are only able to offer a partial cut in this product.

To see how the cut-out can be removed once delivered, please see our Solid Surface Installation and Care Guide.

Using our expert knowledge and state-of-the-art machinery we are able to provide cut-outs for hobs of any size.

To protect the structure of the worktop, we recommend leaving a minimum of 100mm between the hob aperture and the edge of the surface.

Please ensure you’re providing the cut out dimensions for your hob rather than the internal/external dimensions to ensure your hob fits as expected.

Please note: to prevent splitting, corners will need a minimum radius of 8mm.

To protect the integrity of the product in transit we are only able to offer a partial cut in this product.

To see how the cut-out can be removed once delivered, please see our Solid Surface Installation and Care Guide.

Priced per tap hole.

We can provide a tap hole cut-out for any specified measurement.

The diameter for a standard tap hole is 35mm but there are a number of different sizes available so please be sure to check the measurements for your specific tap.

We can provide ellipse ends of any radius for your solid surface worktop. Ellipse ends are a stylish, elegant option for any home and look fantastic in contemporary settings.

A fantastic option for a breakfast bar, kitchen island or simply for the freestanding end of the worktop over a run of cabinets.

A tapered cut goes diagonally across the work surface.

Tapered cuts are an excellent solution for uneven walls and look striking when used to create a feature as part of a breakfast bar or kitchen island.

ONE SET

TWO SETS

Drainage grooves are the perfect finishing touch for your solid surface worktop and are recommended for worktops being fitted with an undermounted sink.

Our drainage grooves are applied in sets of four and are tapered to allow for natural drainage.

Standard drainer groove length is 450mm, although we can accommodate longer or shorter lengths if required.